Multi Para Monitor

Multi Para Monitor

Para is 5 parameter monitor with 12” colour TFT. User friendly menu driven settings through encoder. It is used in ICU as a bedside monitor. • Parameters are as follows,  3 ECG channels  SPO2  NIBP  Respiration  Temperature 1. General Dimensions : 276mm X 336mm X 161mm (H x W x D) Weight : 5 Kg. with in built battery.Display : 12.1” Color TFT LCD Resolution : 800 x 600 pixels User Interface : Encoder 2. Power supply Input voltage range : 150v-270v AC, 50 / 60 Hz (+/- 5 %)Battery type : 12v/4.5AH (in-built)Charging time : 80% charging in 12 hrs (typically)Backup : 3hrs on full chargePower ratings : 40w.3. Environmental Operating Temp : -5 ºC to +40 ºC Humidity : up to 95 % non-condensing. 4. ECG Frequency response : 0.5 Hz to 35 Hz Lead selection : Lead I, II, III, aVR, aVL, aVF and V Heart rate range : 20 to 220 bpm. Gain setting : 0.5, 1.0, and 2.0. CMRR : > 90 db. Sweep speed : 12.5, 25.0, 50.0 mm/S. Accuracy of HR : +/- 1 bpm Data output : RS232 output of ECG, SpO2, NIBP and Respiration & Temperature 5. SpO2 Range : 0 to 100 %. Accuracy : +/-2 %, (70 – 100% of SpO2) , +/-3 % (50 – 69% of SpO2) 6. NIBP Method : Oscillometric Range : 20 to 230 Time interval : User selectable 3 min. to 250 min. Modes : Manual and AutomaticCuff : Single tube with Velcro.
Cuff deflation : Automatic. Patient type : Adult only 7. RESPIRATION Range : 1 to 60 bpm Accuracy : +/-2 bpm 8. TEMPERATURE Measurement Range: 5 to 50 ºC and 41 to 122 ºF Temperature unit : Celsius or Fahrenheit  Settings o Limit setting for individual parametero Facility to set default settings. Keys: Following hotkeys are provided for fast and easy operation o Alarm ON / OFF o QRS Beep ON / OFF o Take BP o Home o Power  knobs: o Encoder interface for browsing o QRS beep volume knob *