Hospital Equipments Paediatric Equipment Surgical Instruments Manufacturer

Baby Incubator (Servo Type) (P.E-01)	Baby Warmer (P.E-02)	Phototherapy Unit For Paediatric Jaundice Management (P.E-03)
Phototherapy Unit For Paediatric Jaundice Management (P.E-04)	Infentometer (P.E-05)	Ambubag (P.E-06)
Paediatric Laryangoscope (P.E-07)	Paediatric Stethoscope (P.E-08)

Baby Warmer (P.E-02)

Three level safety ciruits:
Constant indication and control of air & skin temperature.
Individual sensors for air & skin.
L.E.D. bar graph with 4 increments, to indicate heater output

Servo Specification:

A1 Over Temp. cut off	37.5oC
A2 Compenent failure	0.7oC, above set value automatically
A3 System fail	38oC parallel electrical cutoff.
Max. Temp. setting	380C

Alarms:

Over temperature	Audio Visual
Sensor fail	Audio Visual
Check Ambient	Audio Visual
System fail	Audio Visual

Technical Specifications :

Model	AD 18
Length	27 inch. (685 mm)
Depth	17 inch. (711 mm)
Height	51 inch. (1700 mm)
Weight	40 kgs approx.
Baby bed	Fabricated in stainless steel
Demensions	28 x 18(711 x 457 mm)
Tilt	-8 Degrees
Storage	2 open compartments in stainless steel
Working level	Approx. 950mm from ground
Best environment for operation	220 C to 290 C
Electrical Rating	230 V.A.C. - 10% 50 Hz
Heater wattage	Maximum 500 Watts
Observation lamp	60 Watts
Sensor	Flat skin probe
Heater	2 Silicon quartz crystal heaters
Electronic Controller	3 digit green L.E.D. display for patients temp.
Display resolution	0.10 C

Request a Quote